How To: KitKat Leaked! How to Install the Latest Android 4.4.2 Build on Your AT&T Samsung Galaxy Note 3

KitKat Leaked! How to Install the Latest Android 4.4.2 Build on Your AT&T Samsung Galaxy Note 3

The @DesignGears guys have been busy today, leaking an unofficial KitKat build (Android version 4.4.2) for the AT&T Samsung Galaxy Note 3. The latest is a peek into what the international variants are beginning to see, although this build is far from official. Still, if you want to give it a shot, I'll show you how to install it, but make sure to check out the details below the how-to to see what you can expect, good or bad.

Warning: This Build Could Harm Your Note 3

Since this is not an official build, there's always the chance that you could brick your Note 3 by installing it. This build is NOT intended for the public, and you WILL make permanent changes to your device by installing it. This means you will not be able to return to your Jelly Bean build. Also, installing this KitKat build WILL wipe ALL of your data.

How to Install the Leaked KitKat Update

All things considered, installation could not be easier.

  1. Head over to the official thread on XDA and grab the OneClick installation file. This will only work on Windows-based PCs at the moment, so sorry Mac users.
  2. Make sure to have the proper drivers installed, then plug your Note 3 into your computer.
  3. Extract the installer, then right-click on it and "Run as administrator."
  1. Hit "Start" on the OneClick installer and watch the magic happen.
  1. Once the installer is finished, your device will boot back up, and you'll be enjoying some KitKat goodness.

Seeing that this is not an official build, don't expect to hear anything from AT&T or Samsung as to what is and isn't working. For that, we must turn to the brave community of early adopters, and here's the initial report:

The Good Things About This KitKat Build

Smoother User Experience

While there aren't many (or any) UI changes, quite a few users are reporting smoother transitions as well as overall snappier functionality. Of course, this could be due to the fact that your device has just been formatted, so only time will tell whether these results are legit.

Better Battery Life

Also somewhat difficult to gauge on initial use, reports of longer battery life have surfaced from multiple users, just take a look in the screenshot on the right below.

Camera Improvements

Smart Stabilization is more effective and macro shots are actually possible now. You'll also notice a direct camera widget on your lock screen.

The Bad Things About This KitKat Build

There is No Going Back

The test build ships with a new, locked bootloader specifically for KitKat, meaning that it has to be installed prior to installing the ROM. While locked bootloaders are nothing new for AT&T, this means that for all intents and purposes, there will be no easy way to downgrade your bootloader, thus no easy way to downgrade your ROM.

There is No Root...Yet

The build is new, so naturally we'd expect some growing pains, but as of now—there are no working methods to achieve root. All existing methods have been exhausted, so for the time being, we're stuck on stock ROMs and kernels, and we're going to have to hold off of any Xposed mods for now. Root tends to happen sooner rather than later, so stay tuned.

No ART Implementation

Google's new, much hyped runtime environment is noticeably missing from this build, as well as "official" international builds. This may be the case for all current devices, as Samsung may not be willing to update their existing TouchWiz software. The Galaxy S5, with its new TouchWiz base, may be the first Samsung device to see ART implementation.

No More Third-Party Cases

Predictably, Samsung new policy of restricting third-party accessories is alive and well on this build, and without root, you're options of getting around this policy are limited. But, Samsung has recently mentioned that this was a "bug" on the Note 3, and to expect a patch soon.

Users Reporting Loss of Data

Some users are reporting loss of their data connection after loading this build. This usually occurs when previous ROMs mess with your APN data. To get everything working again, go to Settings -> Connections -> More Networks -> Mobile Networks -> Access Point Names -> + -> and add the following info:

Other Hiccups

Users are reporting issues with Google Wallet and Isis Mobile Wallet, so if you use those services, you may also want to hold off. Additionally, Sony's "a" CLOCK and News360 apps are totally nonfunctional, although these seem to be broader KitKat issues.

Considering taking the plunge? Maybe you'd rather hold off for a more stable build? Let us know in the comments below.

Just updated your iPhone? You'll find new features for TV, Messages, News, and Shortcuts, as well as important bug fixes and security patches. Find out what's new and changed on your iPhone with the iOS 17.6 update.

11 Comments

will the same work for my lenovo s820 ROW or is this just for the note3 specifically

This is only for the Note 3, using anything from this guide could cause some major issues with your device.

<OSM> All threads completed. (succeed 0 / failed 1)???

Try to run this process through "Download" mode. Make sure USB Debugging is checked, then power off your device. Now, start it again with VolumeDown+Home+Power to enter Download mode.

Now run the process through ODIN again and it should complete. Once done, reboot.

What is your phone's model number? You can check in Settings -> About device.

<OSM> All threads completed. (succeed 0 / failed 1)
I get this message and I have a N900A model

Try to run this process through "Download" mode. Make sure USB Debugging is checked, then power off your device. Now, start it again with VolumeDown+Home+Power to enter Download mode.

Now run the process through ODIN again and it should complete. Once done, reboot.

Is this update the same as what AT&T will be releasing?
and
Will I be able to update AT&T's update over this one?

Share Your Thoughts

  • Hot
  • Latest